保安基準適合証等の交付停止 Records in Japan

1. Issued a certificate of conformity without conducting part of the inspection, other than intentionally. 2. Issued a certificate of conformity without conducting part of the inspection intentionally. 3. Falsified records in the designated maintenance record book.

The violation involved non-compliance with legal regulations, falsification of inspection certificates for 2,137 vehicles, issuance of certificates without completing all inspections and maintenance for 1,728 vehicles, and false entries in designated maintenance records. The cancellation date was March 27, 2026. The responsible department was the Maintenance Division of the Chubu Transport Bureau's Automotive Safety and Technology Department, contact number 052-952-8042.

The company was found to lack a system to comply with legal regulations, issued certificates of conformity without conducting part of the inspection and maintenance, falsified designated maintenance records, and had omissions and errors in some designated maintenance records.

The violations include lack of consistency in finished products, failure to establish a system to comply with laws and regulations, falsification of inspection certificates for two vehicles, issuance of certificates despite non-compliance with safety standards for four vehicles due to non-intentional reasons, issuance of certificates to vehicles with differing identifications for one vehicle, and partial omissions or errors in the designated maintenance records. The responsible department is the Maintenance Division, Automotive Safety and Technical Department, Chubu Transport Bureau, contact number 052-952-8042.

1. Issued safety conformity certificates to 25 vehicles despite them being non-compliant with safety standards, not due to intentional misconduct. 2. Lacked a system to ensure compliance with laws and regulations. Okinawa General Administration Office, Transportation Department, Vehicle Safety Division, 098-866-1837 (extension 85449)

1. Not having a system to comply with legal regulations 2. Conducted illegal modifications Hokkaido Transport Bureau, Vehicle Technology Safety Department, Maintenance and Security Division, 011-290-2752

1. Not having a system in place to comply with legal regulations. 2. Issued a certificate of conformity in a state non-compliant with safety standards, other than intentionally.

Falsified the inspection date and issuance date on the conformity certificate, and issued the certificate. Falsified the validity period of the conformity mark.

Issued a certificate of conformity despite the vehicle not being insured under the compulsory automobile liability insurance during part of the period from the issuance date to the expiration date of the vehicle inspection validity period updated by the certificate.

The violations include not having a system to ensure compliance with laws, issuing certificates of conformity without conducting some inspections and maintenance, defects in inspection and maintenance or inspection of vehicles with certificates of conformity, and false entries in designated maintenance records. The contact is the Maintenance Division of the Automobile Safety and Technical Department, Kanto Transport Bureau, at 045-211-7254 (extension 5476).

1. Partial omission and errors in the designated maintenance record book. 2. Issued a conformity certificate for vehicle types outside the scope of authorized work. Kanto Transport Bureau, Vehicle Technology Safety Division, Maintenance Section, 045-211-7254 (extension 5476).

1. Not in a system to comply with legal regulations. 2. Issued a certificate of conformity without conducting part of the inspection, other than intentionally. 3. Omission or errors in some entries in the designated maintenance record book. Contact: China Transport Bureau Vehicle Technology Safety Department Maintenance and Security Division 082-228-9142

1. Not having a system to comply with legal regulations. 2. Issued a conformity certificate without conducting part of the inspection, other than intentionally. 3. Falsified records in the designated maintenance record book. - Chugoku Transport Bureau, Vehicle Technology Safety Division, Maintenance and Security Section, 082-228-9142

1. Issued a certificate of conformity despite the vehicle being non-compliant with safety standards, not due to intentional misconduct. 2. Omitted or incorrectly recorded information in the designated maintenance record book. 3. Issued a certificate of conformity during a period when the compulsory automobile liability insurance was not in effect for most of the validity period of the vehicle inspection renewed by the certificate.

1. Failure to submit inspector notification and change notification. 2. Issued a certificate of conformity despite the vehicle being uninsured for part of the period from the issuance date of the certificate of conformity to the expiration date of the vehicle inspection validity period updated by the certificate.

1. Not having a system in place to comply with legal regulations. 2. Issued a certificate of conformity despite the vehicle being uninsured under compulsory automobile liability insurance during part of the period from the certificate issuance date to the expiration date of the vehicle inspection validity period updated by the certificate.

The company was found to lack a system for complying with legal regulations, issued certificates of conformity without proper inspection due to reasons other than intentional misconduct, failed to conduct some parts of inspections and issued certificates of conformity, and had omissions and errors in the designated maintenance records. Contact: China Transport Bureau, Automotive Technology Safety Department, Maintenance and Safety Division, 082-228-9142.

Failed to conduct some or all inspections of testing equipment; omitted or incorrectly recorded information in the designated maintenance record book; issued a certificate of conformity and a vehicle inspection certificate valid until the expiration date of the vehicle inspection period updated by the certificate, despite the vehicle being uninsured for most of that period.

1. Issued a certificate of conformity intentionally while the vehicle was not compliant with safety standards. 2. Falsified entries in the designated maintenance record book. 3. Omitted or made errors in entries in the designated maintenance record book. Contact: Kanto Transport Bureau, Vehicle Technology Safety Division, Maintenance Section, 045-211-7254 (extension 5476).

The violations include failure to establish a compliance system, issuance of certificates with unauthorized modifications, issuance of certificates when the vehicle may not meet safety standards, intentionally not conducting parts of inspections, issuing certificates to vehicles with different identifications, false entries in designated maintenance records, and incomplete or incorrect entries in those records. Contact: Vehicle Safety and Maintenance Division, Kyushu Transport Bureau, 092-472-2537.

Failure to establish a system to comply with laws; issued certificates of conformity for 7 vehicles despite non-compliance with safety standards not due to intentional acts; issued certificates of conformity for 4 vehicles without conducting part of the inspections due to non-intentional reasons; incomplete or incorrect entries in designated maintenance records.

1. Not having a system to comply with legal regulations. 2. Issued a certificate of conformity for one vehicle in a non-compliant condition with safety standards, other than intentionally. 3. Issued a certificate of conformity for one vehicle with a different identity. 4. Partial omission or errors in the designated maintenance record book.

Issued a certificate of conformity for vehicle types outside the scope of their authorized operations.

1. Not having a system to comply with legal regulations. 2. Issued a certificate of conformity for one vehicle despite the vehicle being uninsured under the compulsory automobile liability insurance during part of the period from the certificate issuance date to the expiration date of the vehicle inspection validity period updated by the certificate.

1. Not having a system to comply with legal regulations 2. Falsified certification by inspectors (for 2 vehicles) 3. Falsified entries in designated maintenance records Contact: Hokkaido Transport Bureau, Vehicle Technology Safety Department, Maintenance and Security Division, 011-290-2752

The violations include issuing compliance certificates under improper modification conditions, issuing certificates in non-compliance with safety standards due to reasons other than intent, issuing certificates without conducting part of the inspection intentionally or unintentionally, incomplete or incorrect entries in designated maintenance records, and performing unauthorized modifications. Contact: Kanto Transportation Bureau, Vehicle Safety and Maintenance Division, 045-211-7254 (extension 5476).

1. Issued a safety compliance certificate in a non-compliant condition due to reasons other than intentional misconduct. 2. Issued a compliance certificate despite discrepancies in identity. 3. Omitted part of the designated maintenance record book. Contact: Hokuriku Shinetsu Transport Bureau, Vehicle Technology Safety Department, Maintenance and Safety Division, 025-285-9155 (extension 3624).

The violations include lack of separation between inspection and maintenance, failure to establish a system to comply with laws, issuance of certificates in cases of illegal modifications, issuance of certificates in non-compliance with safety standards not due to intentional acts, failure to perform part of inspection or maintenance before issuing certificates, issuance of certificates without performing part of the inspection intentionally or unintentionally, false entries in designated maintenance records, and performing illegal modifications. Contact: Kanagawa Transport Bureau, Vehicle Technology Safety Department, Maintenance Division, 045-211-7254 (extension 5476).

1. Issued a safety standards compliance certificate while the vehicle was in an illegally modified state. 2. Issued a safety standards compliance certificate without conducting part of the inspection, other than intentionally. 3. Errors in the designated maintenance record book.

The organization was not in a system to comply with legal regulations. It issued a certificate of conformity for a vehicle in a non-compliant state due to reasons other than intentional misconduct. The vehicle that received the certificate had defects in inspection and maintenance.

1. Not having a system in place to comply with legal regulations. 2. Issued certificates of conformity for two vehicles while they were non-compliant with safety standards, due to reasons other than intentional misconduct. 3. Issued certificates of conformity for one vehicle without conducting part of the inspection, due to reasons other than intentional misconduct.

Falsification of designated maintenance records

Issued a certificate of conformity for vehicle types outside the scope of their authorized operations.

The violations include failing to perform part of the inspection and maintenance before issuing the certificate of conformity, falsification of designated maintenance records, and issuing certificates of conformity for vehicle types outside the scope of their authorized operations. Contact: Kanto Transport Bureau, Vehicle Technology Safety Division, Maintenance Section, 045-211-7254 (extension 5476).

Violations include failure to establish a compliance system, knowingly issuing certificates of conformity for vehicles not meeting safety standards, issuing certificates without completing inspections (for 5 vehicles) due to reasons other than intent, falsification of designated maintenance records, and partial omissions or errors in the records.

1. Conducted illegal modifications. 2. Lacked a system to comply with legal regulations. Contact: Hokuriku Shinetsu Transport Bureau, Vehicle Technology Safety Department, Maintenance and Security Division, 025-285-9155 (extension 3624).

The violations include falsification of inspection and issuance dates on the certificate of conformity, issuing certificates without conducting the necessary inspections (not due to intentional acts), falsification of the designated maintenance record book, partial omission or errors in the record book, issuance of certificates for vehicle types outside the designated scope, and failure to submit change notifications. The responsible department is the Maintenance Division of the Automobile Safety and Technical Department, Kanto Transport Bureau, contact number 045-211-7254 (extension 5476).

The violations include: lack of a compliance system with legal regulations; issuance of certificates of conformity for 21 vehicles despite non-compliance with safety standards not due to intentional acts; issuance of a certificate of conformity for 1 vehicle without conducting part of the inspection, not due to intentional acts; issuance of a certificate of conformity for 1 vehicle despite differences in vehicle identity; and partial omissions or errors in the designated maintenance records.

1. Issued a certificate of conformity in a state of illegal modification. 2. Issued a certificate of conformity to vehicles with differing identities. 3. Omitted or incorrectly recorded information in the designated maintenance record book. Contact: Kanto Transport Bureau, Vehicle Technology Safety Division, Maintenance Section, 045-211-7254 (extension 5476).

Issued a certificate of conformity for vehicles with differing identities.

Failure to establish a system to comply with laws; issued a compliance certificate for a vehicle with differing identity; incomplete or incorrect entries in designated maintenance records; did not retain designated maintenance records for two years; issued a compliance certificate during a period when compulsory insurance was not in effect for some duration of the vehicle's validity period after certificate issuance.

1. Not having a system to comply with legal regulations. 2. Intentionally not conducting part of the inspection and issuing a certificate of conformity. 3. Issuing a certificate of conformity for vehicles with differing identities. 4. Falsification in the designated maintenance record book.

The violations include failure to establish a compliance system, issuing safety certificates with unauthorized modifications, incorrect recording of inspection dates on safety certificates, issuing certificates without conducting parts of the inspection intentionally or unintentionally, falsification and errors in designated maintenance records.

The entity was not in a system compliant with legal regulations; there were omissions and errors in the designated maintenance records; and a safety compliance certificate was issued during some periods when compulsory automobile liability insurance had not been obtained, despite the vehicle's inspection validity period still being in effect.

1. Not having a system in place to comply with legal regulations. 2. Issued certificates of conformity without conducting part of the inspection, other than intentionally, for one vehicle. 3. Issued certificates of conformity to two vehicles with differing identities.

The entity was found to be non-compliant with legal requirements, including failure to submit notification of inspector changes, issuing certificates of conformity without conducting all required inspections and maintenance, issuing certificates to vehicles with differing identifications, incomplete or incorrect entries in designated maintenance records, and not retaining these records for two years.

Failure to establish a system to comply with legal regulations; issuance of certificates of conformity without conducting part of the inspections, both intentionally (25 vehicles) and unintentionally (39 vehicles); false entries in designated maintenance records; partial omissions and errors in designated maintenance records.

The violations include failure to establish a system to comply with laws, issuance of certificates in a state of illegal modification, issuance of certificates in a non-compliant state both intentionally and unintentionally, issuance of certificates to vehicles with differing identities, false entries in designated maintenance records, and partial omissions or errors in the records.

Issued a certificate of conformity for vehicle types outside the scope of their authorized operations.

Issued safety compliance certificates to vehicles that did not meet safety standards, and to vehicles for which some inspections were not conducted, due to reasons other than intentional misconduct.

Issued a safety standards compliance certificate despite the vehicle not being insured under the compulsory automobile liability insurance during part of the period until the renewal of the vehicle inspection validity.

Failure to separate inspection and maintenance tasks; insufficient staff; not securing the number of qualified maintenance engineers; lack of a system to comply with legal regulations; false entries in the designated maintenance record book; partial omissions and errors in the designated maintenance record book.

The violations include failure to establish a system to comply with laws, knowingly issuing certificates of conformity for vehicles that did not meet safety standards, issuing certificates without completing some inspection and maintenance procedures, defects in inspected or maintained vehicles at the time of certificate issuance, and false entries in designated maintenance records. The responsible department is the Maintenance Division of the Automotive Safety and Technical Department, Chubu Transport Bureau, contact number 052-952-8042.

1. Did not have a system in place to comply with legal regulations. 2. Carried out illegal modifications. Kinki Transport Bureau, Vehicle Technology Safety Division, Maintenance Section 06-6949-6453

1. Not in a system to comply with legal regulations. 2. Issued a conformity certificate without conducting part of the inspection and maintenance. 3. Omission and errors in some entries in the designated maintenance record book. Contact: China Transport Bureau Vehicle Technology Safety Division Maintenance and Security Section 082-228-9142

1. The organization does not have a system in place to comply with legal regulations. 2. A conformity certificate was issued after intentionally not conducting part of the inspection. 3. A conformity certificate was issued after unintentionally not conducting part of the inspection. 4. Some entries were missing or incorrect in the designated maintenance record book. Contact: Hokuriku Shinetsu Transport Bureau, Vehicle Technology Safety Department, Maintenance and Security Division, 025-285-9155 (extension 3624).

Issued certificates of conformity despite non-compliance with safety standards and incomplete inspections, due to reasons other than intentional acts; falsification of designated maintenance records. Contact: Kanto Transport Bureau, Vehicle Safety Department, Maintenance Division, 045-211-7254 (extension 5476).

1. The finished product does not have consistency. 2. The organization is not in compliance with legal regulations. 3. A conformity certificate was issued in a state of illegal modification. 4. Some entries are missing in the designated maintenance record book. Chubu Transport Bureau, Vehicle Technology Safety Division, Maintenance Section 052-952-8042

1. Issued a certificate of conformity despite non-compliance with safety standards, not due to intent. 2. Issued a certificate of conformity without conducting part of the inspection, not due to intent. 3. Omission and errors in some entries in the designated maintenance record book. Contact: Kinki Transport Bureau, Vehicle Technology Safety Division, Maintenance Section 06-6949-6453

1. Issued a certificate of conformity for a vehicle despite discrepancies in identity. 2. Omitted or incorrectly recorded information in the designated maintenance record book. 3. Issued a certificate of conformity during a period when the vehicle was not enrolled in compulsory insurance, despite the certificate covering the validity period of the vehicle inspection renewal.

The violations include not having a system in place to comply with laws, issuing safety certificates despite non-compliance with safety standards not due to intentional acts, issuing safety certificates without completing some inspection and maintenance procedures, and missing entries in designated maintenance records. Contact: Shikoku Transport Bureau, Vehicle Technology Safety Division, Maintenance and Safety Section, 087-802-6783 (extension 3463).

1. Issued a safety standards compliance certificate for a vehicle that was not in compliance with safety standards, other than due to intentional actions. 2. Issued a safety standards compliance certificate for vehicles with differing identification. 3. Made partial errors in the designated maintenance record book. Shikoku Transport Bureau, Vehicle Technology Safety Division, Maintenance and Safety Section, 087-802-6783 (extension 3463)

1. Issued a certificate of conformity without conducting part of the inspection, other than intentionally. 2. Omission and errors in some entries of the designated maintenance record book. Kanto Transport Bureau, Vehicle Technology Safety Division, Maintenance Section 045-211-7254 (extension 5476)

Falsification of designated maintenance records. Lack of a system to comply with legal regulations. Contact: Hokkaido Transport Bureau, Vehicle Technology Safety Department, Maintenance and Security Division, 011-290-2752

1. Issued a certificate of conformity for vehicles with differing identities. 2. Falsified entries in the designated maintenance record book. 3. Omitted or made errors in entries in the designated maintenance record book. Contact: Kanto Transport Bureau, Vehicle Technology Safety Division, Maintenance Section, 045-211-7254 (extension 5476).

1. Failure to submit inspector notification and change notification. 2. Issued a certificate of conformity despite non-compliance with safety standards due to reasons other than intentional acts. 3. Issued a certificate of conformity to vehicles with differing identities. Contact: Kyushu Transport Bureau, Vehicle Technology Safety Division, Maintenance Section, 092-472-2537

1. Issued a certificate of conformity despite the vehicle not complying with safety standards, other than due to intentional acts. 2. Issued a certificate of conformity to a vehicle that was not identical in identity.

1. Insufficient number of workers. 2. Issued certificates of conformity in a non-compliant condition due to reasons other than intentionality. 3. Partial omissions and errors in the designated maintenance record book. Contact: Kanto Transport Bureau, Vehicle Technology Safety Division, Maintenance Section, 045-211-7254 (extension 5476).

1. Issued a certificate of conformity in a non-compliant condition with safety standards, other than intentionally. 2. Some entries were missing or incorrect in the designated maintenance record book. Contact: Kanto Transport Bureau, Vehicle Technology Safety Division, Maintenance Section, 045-211-7254 (extension 5476).

Issued certificates of conformity despite non-compliance with safety standards, other than intentionally. Missing or incorrect entries in the designated maintenance record book.

The violations include: 1. Not having a system to comply with legal regulations. 2. Issuing a certificate of conformity when there is a risk of non-compliance with safety standards. 3. Issuing a certificate of conformity without conducting part of the inspection, other than intentionally. 4. Omissions or errors in the designated maintenance record book. 5. Failing to calibrate some or all inspection equipment.

The violations include not having a system in place to comply with laws, issuing conformity certificates in a state of illegal modification, and falsifying designated maintenance records. Contact: Tohoku Transport Bureau, Vehicle Technology Safety Department, Maintenance and Security Division, 022-791-7534.

The entity was not in a system compliant with legal regulations, issued a conformity certificate without performing part of the inspection and maintenance, and falsified the designated maintenance record book.

1. Issued a safety standards compliance certificate for a vehicle despite differences in identity. 2. Issued a safety standards compliance certificate for a vehicle during a period when compulsory automobile liability insurance was not in effect, before the renewal of the vehicle inspection validity period expired.

Issued a certificate of compliance with safety standards despite the vehicle not being insured under the compulsory automobile liability insurance during part of the period until the renewal of the vehicle inspection validity.

The violations include failure to establish a system compliant with legal regulations, issuing certificates of conformity in non-compliance states due to non-intentional reasons, failing to perform parts of inspections and maintenance while issuing certificates, falsification of designated maintenance records, and partial omissions or errors in the records.

1. Issued a certificate of conformity in a non-compliant state with safety standards other than intentionally. 2. Omitted or incorrectly recorded parts of the designated maintenance record book. 3. Issued a certificate of conformity for a vehicle type other than the intended type.

The entity was not in a system compliant with legal regulations. It issued certificates of conformity despite non-compliance with safety standards, not only intentionally. It issued certificates of conformity to vehicles with differing identifications. There were omissions and errors in some entries in the designated maintenance records. The contact is the Maintenance Division, Automobile Technical Safety Department, Chubu Transport Bureau, phone 052-952-8042.

The violations include: 1. Issuing a certificate of conformity without performing part of the inspection and maintenance. 2. Issuing a certificate of conformity without performing part of the inspection due to reasons other than intentional acts. 3. No entries in the designated maintenance record book. 4. Partial omission or errors in entries in the designated maintenance record book.

1. Issued a certificate of conformity in a non-compliant state with safety standards other than intentionally. 2. Did not retain the designated maintenance record book for two years.

1. Issued a safety standards compliance certificate despite the vehicle not being enrolled in compulsory automobile liability insurance during part of the period until the renewal of the vehicle inspection's expiration date. 2. Some entries were missing or incorrect in the designated maintenance record book. Kyushu Transport Bureau, Vehicle Technology Safety Division, Maintenance Section 092-472-2537

Issued a certificate of conformity despite non-compliance with safety standards, other than intentionally.

Six violations related to the issuance of vehicle certificates and maintenance records by the Kanto Transportation Bureau's Vehicle Safety Department.

1. Issued a certificate of conformity while the vehicle was illegally modified. 2. Omitted and incorrectly recorded information in the designated maintenance record book. Shikoku Transport Bureau, Vehicle Technology Safety Department, Maintenance and Security Division, 087-802-6783 (extension 3463)

1. Issued a certificate of conformity in a non-compliant state with safety standards, other than intentionally. 2. Omitted or incorrectly recorded parts of the designated maintenance record book.

The entity was not in a system compliant with legal regulations; issued certificates of conformity without completing all inspections and maintenance; falsified entries in the designated maintenance record book; and omitted some entries in the record book. Contact: Chubu Transport Bureau, Vehicle Technology Safety Division, Maintenance Section, 052-952-8042.

1. Issued a certificate of conformity in a non-compliant condition with safety standards other than intentionally. 2. Issued a certificate of conformity without conducting part of the inspection other than intentionally. 3. Omission or error in recording part of the designated maintenance record book.

Issued a safety standards compliance certificate despite lack of compulsory automobile liability insurance for part of the period until the renewal vehicle inspection validity expiration date.

Failure to establish a system to comply with laws; issued certificates of conformity despite non-compliance with safety standards not due to intentional acts; intentionally omitted parts of inspections when issuing certificates of conformity; falsified designated maintenance records; issued certificates of conformity during periods when compulsory automobile liability insurance was not in effect, despite the certificates covering the vehicle's valid inspection period.

1. Issued a certificate of conformity despite being in a non-compliant state with safety standards, other than intentionally. 2. Omitted or incorrectly recorded parts of the designated maintenance record book. Kyushu Transport Bureau, Vehicle Technology Safety Division, Maintenance Section 092-472-2537

1. Not having a system in place to comply with legal regulations. 2. An agent, under the instruction of the business site manager, impersonated the business site manager to issue a safety standards compliance certificate. 3. Partial omissions and errors in the designated maintenance record book.

1. Issued a certificate of conformity without performing part of the inspection and maintenance. 2. Falsified entries in the designated maintenance record book. Kanto Transportation Bureau, Vehicle Technology Safety Division, Maintenance Section, 045-211-7254 (extension 5476)

1. Not having a system to comply with legal regulations. 2. Conducted illegal modifications. Kyushu Transportation Bureau, Vehicle Technology Safety Division, Maintenance Section 092-472-2537

1. Issued a certificate of conformity despite being in a non-compliant state with safety standards, other than intentionally. 2. Made partial errors in the designated maintenance record book. Kyushu Transport Bureau, Vehicle Safety and Maintenance Division, 092-472-2537

An officer of the business operator falls under disqualification due to the cancellation of the designation at the business premises owned by the operator.

1. Issued a certificate of conformity intentionally while in a non-compliant state with safety standards. 2. Falsified records in the designated maintenance record book. Kanto Transport Bureau, Vehicle Technology Safety Division, Maintenance Section, 045-211-7254 (extension 5476).

There were defects in inspection, maintenance, or examination of vehicles issued with the certificate of conformity.

Failure to establish a system to comply with laws; issued certificates of conformity for vehicles not meeting safety standards due to reasons other than intent; issued certificates of conformity for vehicles with differing identities; issued certificates of conformity without conducting part of the inspection due to reasons other than intent; incomplete or incorrect entries in designated maintenance records.

1. Issued a certificate of conformity without conducting part of the inspection and maintenance. 2. Issued a certificate of conformity without conducting part of the inspection, other than intentionally. 3. Omitted or made errors in some entries in the designated maintenance record book.

1. Issued a certificate of conformity without conducting part of the inspection, other than intentionally. 2. Omitted or made errors in parts of the designated maintenance record book. 3. Did not retain the designated maintenance record book for two years.